Material specifications
Material Matrix
Compare strength, heat resistance and lead times across our materials. Pick one to start a quote.
| Material & grade | Technology | Tensile strength | HDT (temp) | Density | Cost tier | Lead time | Recommended applications | Action |
|---|---|---|---|---|---|---|---|---|
PLA+ / Tough Engineering Prototyping & Form Checks | FDM / FFF | 45 MPa | 58 °C | 1.24 g/cm³ | Economical | 24–48 hours | Rapid geometric validation, visual client mockups, early R&D housings | Quote with this material: PLA+ / Tough Engineering |
PETG Functional & Ductile Parts | FDM / FFF | 50 MPa | 75 °C | 1.27 g/cm³ | Moderate | 24–48 hours | Chemical-resistant brackets, snap clips, semi-flexible covers, water housings | Quote with this material: PETG |
PETG-CF Carbon Composite Stiff Tooling & FixturesSpecs being confirmed | FDM / FFF | 55 MPa | 80 °C | 1.3 g/cm³ | Moderate | 2–3 days | Assembly jigs, check fixtures, stiff brackets with low warp | Quote with this material: PETG-CF Carbon Composite |
ABS / ASA (Weather & UV Resistant) High-Impact & Outdoor | FDM / FFF | 53 MPa | 96 °C | 1.08 g/cm³ | Moderate | 2–3 days | Automotive interior/exterior panels, electronic enclosures, vapour-smoothed parts | Quote with this material: ABS / ASA (Weather & UV Resistant) |
PA-CF (Carbon Fibre Nylon) Ultra-Stiff Metal Replacement | FDM / FFF | 82 MPa | 155 °C | 1.18 g/cm³ | Premium | 2–4 days | Robotic end-effectors, drone chassis, CNC fixture jaws, motor mounts | Quote with this material: PA-CF (Carbon Fibre Nylon) |
TPU 95A Elastomer (Flexible) Gaskets & Dampers | FDM / FFF | 35 MPa (450% elongation) | 60 °C | 1.21 g/cm³ | Moderate | 2–3 days | Custom seals, vibration-damping feet, soft-touch grips, hose couplers | Quote with this material: TPU 95A Elastomer (Flexible) |
Tough & High-Detail SLA Resin High Precision / Smooth | SLA / Resin | 62 MPa | 88 °C | 1.16 g/cm³ | Premium | 24–48 hours | Microfluidics, visual masters for silicone moulds, medical device prototypes | Quote with this material: Tough & High-Detail SLA Resin |
High-Temp Rigid SLA Resin Heat-Resistant PrecisionSpecs being confirmed | SLA / Resin | 51 MPa | ~200 °C | 1.2 g/cm³ | Premium | 2–3 days | Wind-tunnel models, hot-air and fluid flow fixtures, mould inserts | Quote with this material: High-Temp Rigid SLA Resin |
Finishing & secondary operations
- Heat-set brass thread inserts (M3/M4/M5)
Thermally press-fitted for strong, reusable threads.
For: FDM, SLA
- Chemical vapour smoothing
Seals layer lines for a glossy, easy-to-clean surface.
For: FDM
- Matte bead blasting
Uniform, anti-glare matte finish.
For: FDM, SLA
- CMM dimensional report
First-article inspection with measured dimensions.
For: FDM, SLA